INOCOAT COLD BITUMEN EMULSION

Ino-Coat is a high quality environment friendly water based bituminous anionic emulsion. It is free of solvent and exhibits excellent adhesion property. It is applied onto various substrates (concrete, concrete, blocks, bricks, foam concrete fiber and cement board) to improve bonding of bituminous products. It is Solvent free, non-toxic. Environment friendly and non-flammable Binds dust that increases its adhesive property Improves adhesion / bonding of bituminous materials to the substrate, Water-resistant, Penetrates and seals porous surfaces and Economical

Instruction for use

Ino-Coat should be thoroughly stirred before use. The surface should be dry, clean and free of loose materials, dirt, soil, grease, oil or other impurities. Apply Ino-Coat by means of a brush, roller or spray gun into the entire coverage area of the substrate and allow to dry. The drying time depends on the porosity of the substrate and the environmental conditions (approx. 1.0-3.0 hrs).

Storage : Store in a cool place and keep away from all sources of heat and direct sunlight.

Shelf Life : 12 month from the date of manufacture in original packing, if stored properly.

Packing : 15 Ltr Pail / 140 kg / 200 kg Drum.

RAKCOAT COLD BITUMEN EMULSION

RAKCOAT is a high quality environment friendly water based bituminous anionic emulsion. It is free of solvent and exhibits excellent adhesion property. It is applied onto various substrates (concrete, concrete, blocks, bricks, foam concrete fiber and cement board) to improve bonding of bituminous products. It is Solvent free, non-toxic. Environment friendly and non-flammable Binds dust that increases its adhesive property Improves adhesion / bonding of bituminous materials to the substrate, Water-resistant, Penetrates and seals porous surfaces and Economical

Instruction for use

RAKCOAT should be thoroughly stirred before use. The surface should be dry, clean and free of loose materials, dirt, soil, grease, oil or other impurities. Apply RAKCOAT by means of a brush, roller or spray gun into the entire coverage area of the substrate and allow to dry. The drying time depends on the porosity of the substrate and the environmental conditions (approx. 1.0-3.0 hrs).

Storage : Store in a cool place and keep away from all sources of heat and direct sunlight.

Shelf Life : 12 month from the date of manufacture in original packing, if stored properly.

Packing : 15 Ltr Pail / 140 kg / 200 kg Drum.